AE-SFP+DLX-1OG-LR-20KM

SFP Module

This is a 10G SFP+ transceiver module designed for high-speed data transmission over single-mode fiber (SMF) with a distance of up to 20km. It operates at 1310nm wavelength and supports data rates up to 10.3125Gbps.

Specification

Absolute Maximum Ratings
Parameter Symbol Min. Max. Unit Notes
Storage Temperature Ts -40 +85 °C
Supply Voltage Vcc3 0 3.6 V
Relative Humidity RH 5 +85 % Note
Rx Input Average Power Pmax - +1.5 dBm
Recommended Operating Conditions
Parameter Symbol Min. Typical Max. Unit
Operating Case Temperature Tc 0 25 +70 °C
Power Supply Voltage Vcc3 3.13 3.3 3.47 V
ICC3 - - 300 mA
Power Dissipation PD - - 1.0 W
Data Rate 10.3125 Gbps
Transmitter Operating Characteristic Optical, Electrical
Parameter Symbol Min. Typical Max. Unit Note
Centre Wavelength λc 1260 1310 1355 nm
Spectral Width Δλ 1 nm DFB
Side Mode Suppression Ratio SMSR 30 - - dB
Laser Off Power Poff - - -30 dBM
Average Optical Power Pavg -6 - 1 dBm
Extinction Ratio ER 3.5 - - dB
Transmitter Dispersion Penalty TDP - - 3.2 dB
Relative Intensity Noise RIN12OMA - - -128 dB/Hz
Optical Return Loss Tolerance ORLT - - 12 dB
Operating Data Rate - 10.3125 - Gbps
Optical Eye Mask Compliant with IEEE 802.3ae-2002
Tx Input Diff. Voltage VI 180 600 1000 mV
Tx Fault VoL -0.3 - 0.4 V
VoH 2.4 - VCC+0.3
Receiver Operating Characteristic-Optical, Electrical
Parameter Symbol Min. Typ. Max. Unit Note
Center Wavelength λr 1260 1620 nm
Receive Sensitivity In Average Power Psen - - -14 dBm
Receiver Sensitivity In OMA - - -13.6 dBm Note1
Stressed Receiver Sensitivity In OMA - - -11.3 dBm Note1
Los Assert LosA -28 - - dBm
Los Dessert LosD - - -20 dBm
Los Hysteresis LosH 0.5 - 6 dB
Overload Pin - - 0.5 dBm
Receiver Reflectance - - -12 dB
Operating Data Rate - - 10.3125 - Gbps
Rx Output Diff Voltage Vo 300 600 1200 mV
Digital Diagnostic Functions
Parameter Symbol Min. Max. Unit Note
Temperature monitor absolute error DMI_Temp -3 3 C Over operating temp
Laser power monitor absolute error DMI_TX -3 3 dB
RX power monitor absolute error DMI_RX -3 3 dB
Supply voltage monitor absolute error DMI_VCC -3% +-3% V
Bias current monitor absolute error DMI_lbias -10% 10% mA
Control and Status 1/0 Timing Characteristics
Parameter Symbol Min. Max. Unit Note
TX Disable Assert Time t_off - 100 μs Note1
TX Disable Negate Time t_on - 2 ms Note2
Time to initialize including reset of TX_Fault t_init - 300 ms Note3
TX Fault Assert Time t fault_on - 1 ms Note4
TX Fault Reset Time t_reset 10 - μs Note5
LOS Assert Time t_loss_on - 100 μs Note6
LOS Deassert Time t_loss_off - 100 μs Note7

Documentation

Datasheet
Certificate
Test Report

Get in Touch for the Best Solutions

Welcome Form AEconnect
AE CONNECT INDIA PVT LTD

Product Inquiry

Product Inquiry